Switching The S130 On And Off From The Skp - Fujitsu BS2000/OSD Operation Manual

c) You can also terminate the SINIX system using the on/off button on the SKP. However,
please make note of the following:
!
V7
Ê
Ê
You will find a detailed description of how to configure time-controlled startup/shutdown
in the section "up_down" of the "SINIX-2000 V7.0" manual.

5.2 Switching the S130 on and off from the SKP

To switch the S130 on and off from the SKP, it must have the optional on/off facility.
The on/off facility is linked to the SKP via the COM2 V.24 interface.
U25339-J-Z126-1-7600
If the SKP is switched off using the button, it sends the command /shutdown or a
self-defined /run xxxx command to any running BS2000 system before it switches
itself off after a certain wait time has expired.
You can define the shutdown command and the length of the wait period using the
sysadm forms.
Select the menu item "sinix_2000 - System Administration SINIX-2000" on the
UNIX System V, Administration menu.
Select the menu item "up_down - Startup/shutdown settings" on the SINIX-2000
system administration menu.
SKP
Switching the S130 on and off from the SKP
Console
Channel type 2
LAN
V.24
COM2
On/off facility
LAN
S130
SVP
23