Using Frames; Svp Function Keys - Fujitsu BS2000/OSD Operation Manual

Using frames

6.3 Using frames
You assign a job to the SVP by invoking the relevant frame, selecting the desired function,
and specifying the required parameters. To select a function or specify a parameter, you
must enter the alphanumeric characters shown in the frame in the input fields marked by an
arrow (=>). The input fields can be selected with the tab key
the functions and parameters assigned to a job, press the
functions can also be initiated with the SVP function keys.
Instead of selecting a function, you can also enter a command in the command input line in
all frames (screen line 24) and assign a job to the SVP in this way. Frames can also be
selected using the
A command entered in line 24 takes priority over a selected frame function.
General notes on frame operation:
The input is disturbed by the output of messages in line 23 (e.g.
COMPLETED
frame can be filled out and dispatched with

6.3.1 SVP function keys

i
The following diagram shows the position and labelling of the SVP function keys on the
EMDS keyboard mask:
P11 P12
P1
You can activate various functions on the SVP frames with the help of the P keys
the keys
42
FRËFrame-ID
). The key suppresses output of the message for one minute. In this time the
K1
An EMDS keyboard mask, which must be ordered separately, is used to operate the
SVP frames:
Order number: U20076-J-Z148-1
EMDS (SINIX Open Desktop) as of V2.1 for DSS 97801-5xx:
Keyboard masks - 6 strips
P13 P14
P2 P3 P4
to and
K1 K3 F1
, e.g. (to switch to the MODE SELECTION FRAME).
FR ML
ENTER
P15 P16 P17 P18
P5 P6 P7
to .
F3
Standard processing in SVP mode
. Once you have entered all
key. In several frames,
ENTER
SET TIME COMMAND
.
P19 P20 F1
P8 P9 P10 K1
F2 F3
K2 K3
to ,
P1 P20
U25339-J-Z126-1-7600