Removing The Microprocessor Thermal-Cooling Assembly - Dell Latitude 100L Service Manual

Microprocessor Thermal-Cooling Assembly: Dell Latitude 100L Service Manual
Back to Contents Page
Microprocessor Thermal-Cooling Assembly
Dell™ Latitude™ 100L Service Manual

Removing the Microprocessor Thermal-Cooling Assembly

Installing the Microprocessor Thermal-Cooling Assembly
Removing the Microprocessor Thermal-Cooling
Assembly
CAUTION: Before performing the following procedures, read the safety instructions
in your System Information Guide.
CAUTION: To prevent static damage to components inside your computer, discharge
static electricity from your body before you touch any of your computer's electronic
components. You can do so by touching an unpainted metal surface.
1. Follow the instructions in
2. Remove the keyboard.
3. Remove the EMI
4. Disconnect the fan power cable from the system board.
5. Loosen in consecutive order the four captive screws, labeled "1" through "4," that secure the
microprocessor thermal-cooling assembly to the system board.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA.../Latitude/100L/100L_SERVICE_MANUAL/thermal.htm (1 of 3)6/21/2004 1:19:03 AM
"Before Working Inside Your
shield.
Computer."