Microprocessor Module; Removing The Microprocessor Module - Dell Latitude 100L Service Manual

Hide thumbs Also See for Latitude 100L:
Table of Contents

Advertisement

Microprocessor Module: Dell Latitude 100L Service Manual
Back to Contents Page

Microprocessor Module

Dell™ Latitude™ 100L Service Manual

Removing the Microprocessor Module

Installing the Microprocessor Module
Removing the Microprocessor Module
CAUTION:
Before performing the following procedures, read the safety instructions
in your System Information Guide.
CAUTION:
To prevent static damage to components inside your computer, discharge
static electricity from your body before you touch any of your computer's electronic
components. You can do so by touching an unpainted metal surface.
NOTICE:
Press and hold the microprocessor down by applying slight pressure to the center of
the microprocessor while turning the cam screw to prevent intermittent contact between the
cam screw and microprocessor.
NOTICE:
To avoid damage to the microprocessor, hold the screwdriver so that it is
perpendicular to the microprocessor when turning the cam screw.
1. Follow the instructions in
2. Remove the keyboard.
3. Remove the
EMI
4. Remove the
microprocessor thermal-cooling
NOTICE:
When removing the microprocessor module, pull the module straight up. Be careful
not to bend the pins on the microprocessor module.
5. To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate the ZIF-socket cam
screw counterclockwise until it comes to the cam stop.
The ZIF-socket cam screw secures the microprocessor to the system board. Take note of the
arrow on the ZIF-socket cam screw.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...20ok/Latitude/100L/100L_SERVICE_MANUAL/cpu.htm (1 of 3)6/21/2004 1:19:04 AM
"Before Working Inside Your
shield.
Computer."
assembly.

Advertisement

Table of Contents
loading

Table of Contents