Before You Begin; Recommended Tools; Turning Off Your Computer - Dell Latitude 100L Service Manual

Before You Begin: Dell Latitude 100L Service Manual
Back to Contents Page

Before You Begin

Dell™ Latitude™ 100L Service Manual

Recommended Tools

Turning Off Your Computer

Before Working Inside Your Computer
Computer Orientation
Screw Identification
This chapter provides procedures for removing and installing the components in your computer. Unless
otherwise noted, each procedure assumes that the following conditions exist:
You have performed the steps in
Computer."
You have read the safety information in your Dell™ System Information Guide.
A component can be replaced by performing the removal procedure in reverse order.
Recommended Tools
The procedures in this document may require the following tools:
Small flat-blade screwdriver
Phillips screwdriver
Small plastic scribe
Hex nut driver
Flash BIOS update program floppy disk or CD
Turning Off Your Computer
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...ok/Latitude/100L/100L_SERVICE_MANUAL/begin.htm (1 of 7)6/21/2004 1:18:54 AM
"Turning Off Your Computer" and "Before Working Inside Your