Dell Latitude 100L Service Manual page 45

Microprocessor Thermal-Cooling Assembly: Dell Latitude 100L Service Manual
that covers the thermal grease on the assembly. If you are installing the assembly that you
removed in the previous section:
a. Wipe the thermal grease off of the microprocessor thermal-cooling assembly with a clean
paper towel.
b. Squeeze all of the contents of the thermal grease packet (provided with the kit) on to
the microprocessor thermal-cooling assembly.
2. Place the back of the microprocessor thermal-cooling assembly under the palm rest, and lower
the assembly onto the system board.
3. Connect the fan power cable to the system board.
4. Tighten the four captive screws, labeled "1" through "4," in consecutive order.
5. Replace the EMI
6. Replace the keyboard.
Back to Contents Page
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA.../Latitude/100L/100L_SERVICE_MANUAL/thermal.htm (3 of 3)6/21/2004 1:19:03 AM
shield.