Dell Latitude 100L Service Manual page 48

Microprocessor Module: Dell Latitude 100L Service Manual
When the microprocessor module is correctly seated, all four corners are aligned at the same
height. If one or more corners of the module are higher than the others, the module is not seated
correctly.
NOTICE: Hold the microprocessor down while turning the cam screw to prevent intermittent
contact between the cam screw and microprocessor.
2. Tighten the ZIF socket by turning the cam screw clockwise to secure the microprocessor module
to the system board.
3. Wipe the thermal grease off of the microprocessor thermal-cooling assembly with a clean paper
towel.
4. Squeeze all of the contents of the thermal grease packet (provided with the kit) on to the
microprocessor thermal-cooling assembly.
5. Replace the microprocessor thermal-cooling
6. Replace the EMI
7. Replace the keyboard.
8. Update the BIOS
Back to Contents Page
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...20ok/Latitude/100L/100L_SERVICE_MANUAL/cpu.htm (3 of 3)6/21/2004 1:19:04 AM
shield.
using a flash BIOS update program CD.
assembly.