Dell Latitude 100L Service Manual page 29

Keyboard: Dell Latitude 100L Service Manual
NOTICE: To avoid damage to the connector pins, press the keyboard connector evenly into the
interface connector on the system board, and do not reverse the keyboard connector.
1. Connect the keyboard connector of the replacement keyboard to the interface connector on the
system board.
1 M2 x 3-mm screws (4)
2 keyboard
3 keyboard connector
4 interface connector
2. Insert the four securing tabs on the keyboard into their respective slots in the palm rest, and
lower the keyboard into the computer base.
Ensure that all four securing tabs are engaged before trying to completely seat the keyboard.
3. Replace the four M2 x 3-mm keyboard screws.
4. To replace the hinge cover, first insert the left side of the hinge cover into the notches. Snap
down the hinge cover, and ensure that it is flush with the palm rest.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...Latitude/100L/100L_SERVICE_MANUAL/keyboard.htm (4 of 5)6/21/2004 1:18:59 AM
4270E
5X932