Dell Latitude 100L Service Manual page 38

Display: Dell Latitude 100L Service Manual
2. Connect the bottom flex-cable connector to the inverter connector.
3. Lay the display panel in the top cover.
4. Route the display-feed flex cable so that it rests in the notch located in the bottom edge of the top
cover.
5. Replace the four M2 x 3-mm screws that secure the display panel to the top cover.
6. Replace the display
Display Latch Assembly
Removing the Display Latch Assembly
CAUTION: Before performing the following procedures, read the safety instructions in your
System Information Guide.
CAUTION: To prevent static damage to components inside your computer, discharge static
electricity from your body before you touch any of your computer's electronic components.
You can do so by touching an unpainted metal surface.
1. Follow the instructions in
2. Remove the keyboard.
3. Remove the display
4. Remove the display
5. Remove the two M2.5 x 5-mm screws that secure the display latch assembly to the top cover.
6. Lift the display latch assembly up and out of the top cover.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA.../Latitude/100L/100L_SERVICE_MANUAL/display.htm (6 of 7)6/21/2004 1:19:01 AM
bezel.
"Before Working Inside Your
assembly.
bezel.
Computer."