Removing The Microprocessor Thermal-Cooling Assembly; Replacing The Microprocessor Thermal-Cooling Assembly - Dell Inspiron 1420 Service Manual

Back to Contents Page
Microprocessor Thermal-Cooling Assembly
Dell™ Inspiron™ 1420/Dell Vostro™ 1400
Service Manual
Removing the Microprocessor Thermal-Cooling Assembly
Replacing the Microprocessor Thermal-Cooling Assembly
Removing the Microprocessor Thermal-Cooling Assembly
CAUTION:
NOTICE:
surface, such as the back panel on the computer.
1. Follow the instructions in
2. Loosen the three captive screws securing the microprocessor module cover, then remove the cover and set it aside.
1 microprocessor module cover
3. Loosen the four captive screws securing the microprocessor thermal- cooling assembly to the system board, then carefully lift the assembly straight out
of the computer.
1 microprocessor thermal-cooling assembly
Replacing the Microprocessor Thermal-Cooling Assembly
CAUTION:
Great user manuals database on
Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
Before You Begin.
Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.
UserManuals.info
2 captive screws (3)
2 screws (4)