Download Print this page

Char-Broil 463271009 Product Manual page 24

Hide thumbs Also See for 463271009:

Advertisement

Troubleshooting (continued)
ELECTRONIC iGNiTiON:
•Nospark,no ignitionnoise.
•Nospark,some ignitionnoise.
•Sparks,but not at electrodeor at full
strength.
Burner(s)will not light
usingignitor.
(See ElectronicIgnition
Troubleshooting a lso)
Burner(s)will not
matchlight.
Suddendrop in gas
flow or low flame.
Flamesblowout.
Flare-up.
Persistent g reasefire.
Flashback...
(firein burnertube(s)).
Unableto fill LP
cylinder.
One burnerdoes not
lightfrom other
burner(s).
•See "GAS iSSUES:"on previouspage.
•Matchwill notreach.
•Improper methodof match-lighting.
•Out of gas.
•Excessflow valvetripped.
•Vaporlock at couplingnut/LPcylinder
connection.
•Highor gustingwinds.
•Lowon LP gas.
•Excessflow valvetripped.
•Greasebuildup.
•Excessive fat in meat.
•Excessive cookingtemperature.
•Greasetrappedbyfood builduparound
burnersystem.
•Burnerand/orburnertubes are blocked.
•Somedealershaveolderfill nozzles
withworn threads.
•Greasebuildupor food particlesin
end(s)of carryovertube(s).
• SeeSectionI of ElectronicIgnitionSystem.
• SeeSectionII of ElectronicIgnitionSystem.
• SeeSectionIII of ElectronicIgnitionSystem.
•Uselong-stemmatch(fireplacematch).
•See"Match-Lighting" s ectionof Use and Care.
•Checkfor gas in LP cylinder.
•Turnoff knobs,wait 30 secondsand lightgrill. If flamesare still low,
turnoff knobsand LP cylindervalve. Disconnect r egulator.
Reconnect r egulatorand leak-test.Turnon LP cylindervalve,wait
30 secondsand thenlightgrill.
•Turnoff knobsand LP cylindervalve.Disconnectcouplingnutfrom
cylinder.Reconnect a nd retry.
•Turnfront of grill to face windor increaseflameheight.
•RefillLP cylinder.
•Referto "Suddendrop in gas flow"above.
•Cleanburnersand insideof grill/firebox.
•Trimfat from meatbeforegrilling.
•Adjust(lower)temperature accordingly.
•Turnknobsto OFF.Turngas off at LP cylinder.Leavelid in position
and let fire burnout.After grill cools,removeandcleanall parts.
•Turnknobsto OFF.Cleanburnerand/orburnertubes.See burner
cleaningsectionof Use and Care.
•Theworn nozzlesdon'thaveenough"bite"to engagethe valve.Try
a secondLPdealer.
•Cleancarry-overtube(s)with wirebrush.

Advertisement

loading