Advertisement
On back of grill, place upper back panel between side panels and
above lower back panel. Secure upper back panel, in lower holes,
using one 114-20x11/2" s crew, 7mm lock washer, and 7mm flat
washer on each side. Do not fully tighten screws until side shelf
installation is complete in later steps.
back panel
114-20x1Vz"7ran]lock 7ramflat
screw
washer
washer
Insert flange on right side shelf into side shelf brackets on side of firebox.
Attach right side shelf using three 1/4"-20x3/4" screws, 7ram lock washers, 7ram flat washers, 1/4" nuts, shown A.
Attach rear of shelf using one 114.20x11/2 '' screw, 7ram lock washer, and 7ram flat washer in lower hole, shown B.
Attach front of shelf and fascia using one #8x3/8" self-tapping screw and large flat washer, shown C.
Attach front of shelf and fascia using one 1/4"-20x3/4" screw, 7mm lock washer, 7mm flat washer and 1/4" nut, shown D/C.
ht side shelf
screw
7ram lock
washer
7ram
washer
washer
7ram flat
washer
lock
washer
IEl
15
Advertisement
