Performing Common Tasks
This section includes procedures for some common tasks performed on the servers.
"Power On the System" on page 7
■
"Power Off the System" on page 8
■
"Reset the System" on page 8
■
"Update the Firmware" on page 9
■
▼ Power On the System
"Log In to ILOM" on page 2
1.
2. At the ILOM -> prompt, type:
-> start /SYS
Are you sure you want to start /SYS (y/n) ? y
Starting /SYS
->
Note – To force a power-on sequence, use the start -script /SYS command.
Related Information
"Power Off the System" on page 8
■
"Reset the System" on page 8
■
7