Openboot Configuration Variables; Openboot Configuration Variables On The Scc - Fujitsu SPARC Enterprise T5140 Administration Manual

OpenBoot Configuration Variables

This section supplies information about variables storing configuration on the SCC.
OpenBoot Configuration Variables on
the SCC
TABLE 1
non-volatile memory on the system. The OpenBoot configuration variables are
printed here in the order in which they appear when you type the following
command:
ok printenv
OpenBoot Configuration Variables Stored on the System Configuration Card
TABLE 1
Variable
local-mac-address?
fcode-debug?
scsi-initiator-id
oem-logo?
oem-banner?
ansi-terminal?
screen-#columns
screen-#rows
describes the OpenBoot firmware configuration variables stored in
Possible Values
true, false
true, false
0-15
true, false
true, false
true, false
0-n
0-n
Default Value Description
If true, network drivers use their own
true
MAC address, not the server MAC
address.
If true, include name fields for plug-in
false
device FCodes.
SCSI ID of the serial attached SCSI
7
controller.
If true, use custom OEM logo.
false
Otherwise, use the server
manufacturer's logo.
If true, use custom OEM banner.
false
If true, enable ANSI terminal
true
emulation.
Sets number of columns on screen.
80
Sets number of rows on screen.
34
53