Fujitsu SPARC Enterprise T5140 Administration Manual page 71

OpenBoot Configuration Variables Stored on the System Configuration Card (Continued)
TABLE 1
Variable
diag-switch?
error-reset-recovery
network-boot-arguments
Possible Values Default Value
true, false false
boot, sync, boot
none
[protocol, ] none
[key=value, ]
Description
If true OpenBoot verbosity is set to
maximum
If false OpenBoot verbosity is set to
minimum
Command to execute following a system
reset generated by an error.
Arguments to be used by the PROM for
network booting. Defaults to an empty
string. network-boot-arguments can
be used to specify the boot protocol
(RARP/DHCP) to be used and a range
of system knowledge to be used in the
process. For further information, see the
eeprom (1M) man page or your Solaris
Reference Manual.
OpenBoot Configuration Variables 55