Related Information
"Log In to ILOM" on page 2
■
Integrated Lights Out Manager (ILOM) 2.0 Documentation
■
Integrated Lights Out Manager (ILOM) 2.0 Supplement for SPARC Enterprise T5140
■
and T5240 Servers
Integrated Lights Out Manager (ILOM) 3.0 Documentation
■
Integrated Lights Out Manager (ILOM) 3.0 Supplement for SPARC Enterprise T5140
■
and T5240 Servers
▼ Log In to ILOM
This procedure assumes the default configuration of the service processor as
described in your server's installation guide.
●
Open an SSH session and connect to the service processor by specifying its IP
address.
The ILOM default username is root and the default password is changeme.
% ssh root@xxx.xxx.xxx.xxx
...
Are you sure you want to continue connecting (yes/no) ? yes
...
Password: password (nothing displayed)
Waiting for daemons to initialize...
Daemons ready
Integrated Lights Out Manager
Version 2.0.0.0
Copyright 2008 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
->
You are now logged in to ILOM. Perform tasks as needed.
Note – To provide optimum system security, change the default system password.
2
SPARC Enterprise T5140 and T5240 Servers Administration Guide • July 2009