Sound Board/Microphone - Toshiba R600 S4202 - Portege - Core 2 Duo 1.4 GHz Maintenance Manual

4.16 Sound board/Microphone

4.16 Sound board/Microphone
Removing the Sound board/Microphone
To remove the sound board/microphone, follow the steps below and refer to Figure 4-21 and
Figure 4-22.
1. Remove the following screw securing the sound board.
• M2×4C
2. Disconnect the sound board FPC and speaker harness from the connector CN9510
and CN6350 on the sound board and remove the sound board from the slot.
Speaker harness
Figure 4-21 Removing the sound board/microphone (1)
PORTÉGÉ R600 Maintenance Manual (960-709)
S-THIN HEAD
Sound board
CN6350
Sound board FPC
4 Replacement Procedures
×1
M2x4C S-THIN HEAD
CN9510
[CONFIDENTIAL] 4-39