Toshiba R600 S4202 - Portege - Core 2 Duo 1.4 GHz Maintenance Manual page 279

4.20 System board
Installing the System board
To install the system board, follow the steps below and refer to Figure 4-27 and 4-28.
1. Connect the HDD FPC (or SSD FPC), USB board FPC, RJ45 wire harness, sound
board FPC and Bluetooth FFC to the connectors CN1900, CN9600, CN4100,
CN9500 and CN4400 on the system board.
2. Set the system board in place and connect the LCD harness, membrane switch
FPC, keyboard FPC and fingerprint sensor board FFC to the connectors CN5601,
CN9850, CN3230 and CN9800 on the system board.
3. Secure the system board with the following screws.
•
M2×4C
•
M3×5C
PORTÉGÉ R600 Maintenance Manual (960-709)
S-THIN HEAD
BIND
4 Replacement Procedures
×1
×2
[CONFIDENTIAL] 4-51