Camera Module - Toshiba R600 S4202 - Portege - Core 2 Duo 1.4 GHz Maintenance Manual

4.26 Camera module

4 Replacement Procedures
4.26 Camera module
Removing the Camera module
To remove the camera module, follow the steps below and refer to Figure 4-39.
1. Take out the camera module from the slot and disconnect the camera harness from
the connector on the camera module.
NOTE: Do not reuse the removed camera module. Be sure to use a new camera module.
Camera module
Camera harness
Figure 4-39 Removing the camera module
PORTÉGÉ R600 Maintenance Manual (960-709) [CONFIDENTIAL] 4-67