Sony HVR-M35U Operating Instructions Manual page 90

Digital hd videocassette recorder
Hide thumbs Also See for HVR-M35U:
Table of Contents

Advertisement

Troubleshooting
Symptom
When the tape is rewound to its beginning,
the playback automatically starts.
During playback, the unit starts rewinding
suddenly.
When the tape reaches its end, rewinding
starts automatically.
The unit does not function as part of a
digital non-linear editing system.
Although the i.LINK cable is connected,
the image from external equipment is not
displayed.
No image is displayed even though the
video cable is connected correctly.
The image loses color or is distorted when
you play back the tape on a television set
or monitor connected to the unit.
is displayed on the screen.
90
Chapter 6 Maintenance
Cause/Remedy
• The TIMER switch is set to REPEAT.
t Set the TIMER switch to OFF.
• You pressed the PLAY button while holding the REW button down.
t If you do this, the unit rewinds the tape to its beginning and begins playback
(page 12).
• The TIMER switch is set to REPEAT.
t When the TIMER switch is set to REPEAT, the unit starts rewinding at the
moment when a signal for index search or a blank portion is detected. Set the
TIMER switch to OFF.
• The TIMER switch is set to REPEAT.
t When the TIMER switch is set to REPEAT, the unit starts rewinding at the
moment when the end of the tape is detected. Set the TIMER switch to OFF.
• The INPUT SELECT switch is set to a setting other than HDV/DV.
t Set it to HDV/DV.
• The editing controller or the editing software is not compatible with the unit.
t Refer to the instruction manuals of the controller or the software and consult
their manufacturers.
t Disconnect and then reconnect the i.LINK cable correctly.
• The INPUT SELECT switch is set to a setting other than HDV/DV.
t Set it to HDV/DV.
• There are output restrictions for some [SDI/CMPNT] settings of [VIDEO OUT] in
the [IN/OUT REC] menu. For details, see page 73.
• The INPUT SELECT switch setting does not match the cable connected to the
unit.
t Set the INPUT SELECT switch to S VIDEO or VIDEO to match the cable
connection.
t Connect the unit to a television set or monitor that is compatible with its [60i/50i
SEL] format.
t Set [60i/50i SEL] in the [OTHERS] menu, according to the signal-format (page
85).
• This icon is displayed when you playback a tape recorded with 4-channel
microphone recording on another device using external surround microphones.
The unit does not support 4-channel microphone recording using external
surround microphones. (This icon is displayed when you play back a tape
recorded with external 4-channel recording using a surround microphone in
DVCAM or DV (SP) format.)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hvr-m35nHvr-m35eHvr-m35p

Table of Contents