Using The Unit As A Videocassette Recorder; Connections For Recording - Sony HVR-M35U Operating Instructions Manual

Using the Unit as a Videocassette Recorder

This section describes the connections, settings and
operations necessary to perform recording on the unit.
The same settings and operations apply when you are
using the unit for dubbing.
Notes
• For connection of editing devices, refer to the
instruction manual of the editing controller and that of
the editing software you use.
• Edit functions are specified by the editing software.
For details on the editing methods, refer to the
instruction manual of the editing software.
For details, see also page 67 and 68.

Connections for Recording

To video equipment without an i.LINK jack
You can connect the unit to video equipment without an
i.LINK jack. Use the unit as a recorder as follows.
Player
Connect either an S-video cable or a video cable.
Monitor
S-video output
Video output
Audio output
S-video cable (not supplied)
Video cable (not supplied)
Audio cable (not supplied)
HVR-M35 (rear panel)
: Signal flow
Chapter 2 Playback and Recording
Monitor
47