Sony HVR-M35U Operating Instructions Manual page 85

Icon/Menu Submenu
OTHERS 60i/50i SEL
(page 49)
VCR
PROFILE
INITIALIZE
Setting
Switches between 1080/60i (NTSC) and 1080/50i (PAL).
1 Press the J/j buttons to select [YES], then press the EXEC button.
2 Press the J/j buttons to select [YES] again, then press the EXEC button.
You can save the setting values for the unit in the internal memory as VCR profiles. Up to 5
VCR profiles can be saved.
Using these saved profiles lets you quickly obtain suitable unit settings later.
LOAD : You can load the VCR profile settings and use the unit with the settings.
1 Select the VCR profile you want to load by pressing the J/j button and press the EXEC
button.
2 Select [YES] on the confirmation screen by pressing the J/j buttons and press the EXEC
button.
The unit is restarted and the selected VCR profile becomes effective.
SAVE : You can save the current settings in the internal memory as a VCR profile.
1 Select [NEW FILE] or an existing profile name by pressing the J/j button and press the
EXEC button.
2 Select [YES] on the confirmation screen by pressing the J/j buttons and press the EXEC
button.
The VCR profile is saved.
PROFILE NAME : Rename a VCR profile already saved.
1 Select the VCR profile you want to rename by pressing the J/j button and press the
EXEC button.
PROFILE NAME screen is displayed.
2 Select a character by pressing the J/j/K/k button on the profile name screen and
press the EXEC button. Repeat this operation to enter the new name.
– Each name can be up to 12 characters long.
– Characters that can be used in profile names:
A to Z, 0 to 9 and special characters (– _ / # & : . ∗ @)
3 Select [OK] by pressing the J/j/K/k buttons and press the EXEC button.
The profile is renamed.
DELETE : Delete a VCR profile saved.
1 Select the VCR profile you want to delete by pressing the J/j buttons and press the
EXEC button.
2 Select [YES] on the confirmation screen by pressing the J/j buttons and press the EXEC
button.
The VCR profile is deleted.
Note
Do not turn off the unit during the operations below. VCR PROFILE data may be damaged.
– During a SAVE operation
– During a PROFILE NAME edit
Resets the settings to the initial settings, except the CLOCK SET settings.
1 Press the J/j buttons to select [YES], and then press the EXEC button.
2 Press the J/j buttons to select [YES] again, then press the EXEC button.
60i/50i SEL
Change to 50i?
Reboots
after change.
YES
NO
INITIALIZE
R e s e t a l l s e t t i n g s
except "CLOCK SET"
t o d e f a u l t s .
YES
NO
Chapter 5 Adjusting and Setting Through Menus
85