Sony HVR-M35U Operating Instructions Manual page 14

Location and Function of Parts
4 Indicator section
3 DV indicator
2 DVCAM indicator
1 HDV indicator
a HDV indicator
Lights when the unit is in either of the following
operating states.
• When a tape recorded in HDV format is being played
back.
• When [HDV/DV SEL] in the [IN/OUT REC] menu is
set to [AUTO] and HDV signals are being input from
the HDV/DV jack.
• When [HDV/DV SEL] in the [IN/OUT REC] menu is
set to [HDV].
b DVCAM indicator
Lights when the unit is in either of the following
operating states.
• When a tape recorded in DVCAM format is being
played back.
• When the following four conditions are met:
– When [HDV/DV SEL] in the [IN/OUT REC] menu
is set to [AUTO].
– When [ REC MODE] in the [IN/OUT REC] menu
is set to [DVCAM].
– When DV or DVCAM signals are being input from
any of the input jacks.
– During recording or in EE mode.
• When the following three conditions are met:
– When [HDV/DV SEL] in the [IN/OUT REC] menu
is set to [DV].
– When [ REC MODE] in the [IN/OUT REC] menu
is set to [DVCAM].
– During recording or in EE mode.
14
Chapter 1 Overview
7 50i indicator
6 24p indicator
5 30p indicator
4 60i indicator
8 25p indicator
9 HDV-i.LINK indicator
q; DVCAM-i.LINK indicator
qa DV-i.LINK indicator
qs HD-SDI indicator
c DV indicator
Lights when the unit is in either of the following
operating states.
• When a tape recorded in DV format (SP mode only) is
being played back.
• When the following four conditions are met:
– When [HDV/DV SEL] in the [IN/OUT REC] menu
is set to [AUTO].
– When [ REC MODE] in the [IN/OUT REC] menu
is set to [DV].
– When DV or DVCAM signals are being input from
any of the input jacks.
– During recording or in EE mode.
• When the following three conditions are met:
– When [HDV/DV SEL] in the [IN/OUT REC] menu
is set to [DV].
– When [ REC MODE] in the [IN/OUT REC] menu
is set to [DV].
– During recording or in EE mode.
d 60i indicator
Lights when the unit is in one of the following operating
states.
• During recording or in EE mode when [60i/50i SEL] in
the [OTHERS] menu is set to [60i].
• When1080/60i signals or NTSC signals are input from
the HDV/DV jack.
• When a tape that has 1080/60i signals or NTSC signals
is being played back.
qd SD-SDI indicator