Sony HVR-M35U Operating Instructions Manual page 54

Setting the Time Code and User Bits
2
Press the J/j buttons to select [TC/UB SET], then
press the EXEC button.
The following menu list is displayed.
TC / UB SET
RETURN
TC PRESET
UB PRESET
HDV/DV IN TC
TC RUN
TC MAKE
TC FORMAT
JOG TC OUT
[ MENU ] : END
3
Press the J/j buttons to select [TC PRESET], then
press the EXEC button.
The following menu is displayed.
TC PRESET
OK
PRESET
RESET
[ MENU ] : END
4
Press the J/j buttons to select [PRESET], then
press the EXEC button.
The following menu is displayed.
TC PRESET
OK
PRESET
RESET
[ MENU ] : END
5
Set the first two digits. Press the J/j buttons to
select the number, then press the EXEC button.
6
Repeat step 5 to set the other eight digits.
7
Press the J/j buttons to select [OK], then press the
EXEC button.
The time code value is set. The menu display returns
to that of step 3.
8
Press the J/j buttons to select [OK], then press the
EXEC button.
The menu display returns to that of step 1.
To cancel the time code setting
Select [CANCEL] in step 7, then press the EXEC
button.
To reset the time code
Select [RESET] in step 4, then press the EXEC button.
54
Chapter 3 Utilizing the Time Code
00:00:00:00
00:00:00:00
00:00:00:00
To set the value of the user bits
You can set the user bits as eight-digit hexadecimal
values (base 16) to have the date, time, scene number,
and other information inserted into the time code track.
Note
When HDV signals are input from the HDV/DV jack,
the user bits of HDV signals are applied.
In this case, you do not have to follow the procedures
below.
When recording the internal color bars in HDV format,
user bits can still be set.
1
Press the MENU button to display the menu.
For details on the menu, see "Operating Menus" on page
70.
TC/UB SET
TC PRESET
UB PRESET
HDV/DV IN TC
TC RUN
TC MAKE
TC FORMAT
JOG TC OUT
[ MENU ] : END
2
Press the J/j buttons to select [TC/UB SET], then
press the EXEC button.
The following menu list is displayed.
TC / UB SET
RETURN
TC PRESET
UB PRESET
HDV/DV IN TC
TC RUN
TC MAKE
TC FORMAT
JOG TC OUT
[ MENU ] : END
3
Press the J/j buttons to select [UB PRESET], then
press the EXEC button.
The following menu is displayed.
UB PRESET
OK
PRESET
RESET
[ MENU ] : END
00:00:00:00
00:00:00:00