Sony HVR-M35U Operating Instructions Manual page 73

Icon/Menu Submenu
IN/OUT VIDEO OUT
REC
Setting
Selects the mode of the video output jacks.
SDI/CMPNT
Selects the output format from the HD/SD SDI OUT jack and COMPONENT OUT jacks.
Select from [480i], [480p/480i], [1080i/480i], or [720p/480i] when [60i/50i SEL] in the
[OTHERS] menu is set to [60i].
Select from [576i], [576p/576i], [1080i/576i], or [720p/576i] when [60i/50i SEL] in the
[OTHERS] menu is set to [50i].
DOWN CONVERT
Selects the setting for down converting images output from the HD/SD SDI OUT jack,
COMPONENT OUT jacks and analog video jacks when playing back HDV format or inputting
HDV signals from the HDV/DV jack.
BSQUEEZE : Maintains the image vertically and horizontally by compressing the
horizontal ratio. Images appear vertically long.
LETTER BOX : Maintains the aspect ratio of the image by compressing the image
vertically.
EDGE CROP : Maintains the original image size and crops the left and right edges of the
images.
DV WIDE CONV
When signals are output from the HD/SD SDI OUT jack, COMPONENT OUT jacks and
analog video jacks, selects the setting for converting the aspect ratio of a video recorded in
DV-WIDE mode.
BSQUEEZE : Maintains the image vertically and horizontally by compressing the
horizontal ratio. Images appear vertically long.
LETTER BOX : Maintains the aspect ratio of the image by compressing the image
vertically.
EDGE CROP : Maintains the original image size and crops the left and right edges of the
images.
SD-SDI SET
VIDEO INDEX
Sets whether to overlap the aspect ratio and signal-format of SD wide signal with VIDEO
INDEX or not.
BON: VIDEO INDEX is overlapped.
OFF: VIDEO INDEX is not overlapped.
RP188 ATC
Sets whether to overlap the RP 188 ATC (Ancillary Time Code) with SD-SDI output data or
not.
BON: RP188 ATC overlaps.
OFF: RP188 ATC does not overlap.
VICT LNSEL
Selects a line in the vertical blanking interval (VBI) of 50i SD signals to use to insert the
VITC signal.
9th to 22nd line (B19th line)
VICT LNSEL
Selects a line in the vertical blanking interval (VBI) of 60i SD signals to use to insert the
VITC signal.
12th to 20th line (B16th line)
Notes
• Regardless of the playback tape or of the format input to the
setting values displayed on this menu vary depending on the setting of [60i/50i SEL].
• WSS (Wide Screen Signaling) is not output when the picture is output to the COMPONENT
OUT jacks in 480p or 576p. Set the monitor according to the down convert format of the
picture that is output from the unit.
• When you play back a tape in DVCAM (DV) format while an EE picture in NTSC/PAL is
displayed, either the 480i resolution or the 576i resolution is output, regardless of the
setting of [SDI/CMPNT].
• When [480p/480i] or [576p/576i] is selected in [SDI/CMPNT], 480p or 576p signals are
output only from the COMPONENT OUT jacks, but not from the HD/SD SDI OUT jack.
HDV/DV jack, the selectable
Chapter 5 Adjusting and Setting Through Menus
(Continued)
73