Sony HVR-M35U Operating Instructions Manual page 15

e 30p indicator
Lights when the unit is in either of the following
operating states.
• When a tape recorded in 1080/30p format or 720/30p
format is being played back.
• When 1080/30p signals are input from the HDV/DV
jack.
f 24p indicator
Lights when the unit is in either of the following
operating states.
• When a tape recorded in 1080/24p format or 720/24p
format is being played back.
• When 1080/24p signals are input from the HDV/DV
jack.
g 50i indicator
Lights when the unit is in one of the following operating
states.
• During recording or in EE mode when [60i/50i SEL] in
the [OTHERS] menu is set to [50i].
• When 1080/50i signals, or PAL signals are input from
the HDV/DV jack.
• When a tape that has 1080/50i signals or PAL signals
is being played back.
h 25p indicator
Lights when the unit is in either of the following
operating states.
• When a tape recorded in 1080/25p format or 720/25p
format is being played back.
• When 1080/25p signals are input from the HDV/DV
jack.
i HDV-i.LINK indicator
Lights when HDV signals are input/output through the
i.LINK interface.
j DVCAM-i.LINK indicator
Lights when DVCAM signals are input/output through
the i.LINK interface.
k DV-i.LINK indicator
Lights when DV signals are input/output through the
i.LINK interface.
l HD-SDI indicator
Lights when HD signals are output through the HD/SD
SDI OUT jack.
m SD-SDI indicator
Lights when the unit is in either of the following
operating states.
• When SD signals are output through the HD/SD SDI
OUT jack.
• When HDV signals are down-converted and output
through the HD/SD SDI OUT jack.
15
Chapter 1 Overview