Sony PMW-400K Operating Instructions Manual page 150

Assignable switch
setting
BRT Disp
Histogram
Lens Info
Zoom Tele/Wide
Zoom Wide/Tele
Manual Focus Assist
Focus Mag
Zebra
Lens RET
a)
Return Video
Return Video2
Return Video3
Return Video4
Shot Mark1
Shot Mark2
OK Mark
Clip Flag OK
Clip Flag NG
Clip Flag Keep
Color Temp SW 3200K Adjust the white balance with a 3200K preset value.
Color Temp SW 4300K Adjust the white balance with a 4300K preset value.
Color Temp SW 5600K Adjust the white balance with a 5600K preset value.
150 Assigning Functions to Assignable Switches
Function
Turn the display of the brightness level on or off.
Turn the histogram display on or off.
Switch the depth of field indication between off, displayed
in meters, and displayed in feet.
When a lens that supports serial communication is
installed, assign the Zoom Tele function to ASSIGNABLE
4, and assign the Zoom Wide function to ASSIGNABLE 5
(displayed only when <4> and <5> are set).
When a lens that supports serial communication is
installed, assign the Zoom Wide function to ASSIGNABLE
4, and assign the Zoom Tele function to ASSIGNABLE 5
(displayed only when <4> and <5> are set).
Turn the manual focus assist function on or off.
Turn the focus magnification function on or off.
Turn zebra display on or off.
Display return video signals when the optional CBK-CE01
is installed and a camera control unit is connected.
When a camera control unit is not connected, function as
follows.
During recording or playback: Write a shot mark.
In the other states: Conduct a recording review
(if playback is allowed).
Display return video signals during operating the system,
when the optional CBK-CE01 is installed and a camera
adaptor and camera control unit are connected.
Display return video signals during operating the system,
when the optional CBK-CE01 is installed and a camera
adaptor is connected.
Display return video signals during operating the system,
when the optional CBK-CE01 is installed and a camera
adaptor is connected.
Display return video signals during operating the system,
when the optional CBK-CE01 is installed and a camera
adaptor is connected.
Write Shot Mark1.
Write Shot Mark2.
Add or delete an OK mark.
Add/Clear an OK flag to/from the clip being recorded or
played.
Add/Clear an NG flag to/from the clip being recorded or
played.
Add/Clear a KP flag to/from the clip being recorded or
played.
State when camcorder
is next powered on
Setting retained
Setting retained
Setting retained
—
—
Setting retained
Setting not retained
Setting not retained
—
—
—
—
—
—
—
—
Setting not retained
Setting not retained
Setting not retained
Setting retained
Setting retained
Setting retained