Sony PMW-400K Operating Instructions Manual page 113

OPERATION
Menu items Sub-item
VF Setting Color
Makes settings related
to the viewfinder
Mode
screen.
Peaking Type
Peaking Frequency
Peaking Color
Peaking Level
DXF Rec Tally
Marker Setting
Makes settings related
to marker display in the
viewfinder screen.
Center Marker
Center H Position
Center V Position
Settings
–99 to ±0 to +99
Color/B&W
Normal/Color/Both
Normal/High
White/Red/Yellow/Blue
Low/Mid/High
Upper/Both
On/Off
1/2/3/4/Off
–40 to 0 to 40
–40 to 0 to 40
Description
Adjusts the density of the colors
displayed in the viewfinder screen.
Selects "Color" or "B&W" as the
display mode of the viewfinder
screen. (Even when "B&W" is
selected, some indications are
always displayed in color. Examples
include tally indications,
thumbnails, and the skin gate area.)
Selects the peaking type.
Normal: Normal peaking
Color: Color peaking
Both: Both
Selects "Normal" or "High" as the
peaking frequency.
When "Peaking Type" is set to
"Color," selects the peaking color
from among "White," "Red,"
"Yellow," and "Blue."
When "Peaking Type" is set to
"Both," selects the color peaking
level from among "Low," "Mid," and
"High."
When a separately sold viewfinder is
installed, specified whether to light
the tally indicator on the upper side
only ("Upper"), or on both the upper
and lower sides ("Both").
Turns all markers on or off.
Note
When Marker is assigned to the
ASSIGN. 2 switch, this setting is
disabled.
When the center marker is
displayed, selects the type. Select
"Off" if you do not want to display
the marker.
Note
When "Safety Zone," "User Box,"
and "Guide Frame" are set to "On,"
this setting cannot be turned on.
Specifies the horizontal position of
the center marker.
Specifies the vertical position of the
center marker.
Menu List 113