Sony PMW-400K Operating Instructions Manual page 112

OPERATION
Menu items
Rec Function
Makes settings related
to special recording
modes.
Note
When Picture Cache is
assigned to an
assignable switch, this
item is disabled
(displayed in grey).
Assignable SW
Assigns functions to
assignable switches.
See "Assigning
Functions to Assignable
Switches" (page 148)
for more information
about assigning
functions.
112 Menu List
Sub-item Settings
Number of Frames The available settings
vary depending on the
settings in "Format" >
"HD System Line and
Format" > "System
Frequency."
2frame/6frame/12frame
1frame/3frame/6frame/
9frame
Interval Time 1/2/3/4/5/6/7/8/9/10/15/
20/30/40/50 (sec)
1/2/3/4/5/6/7/8/9/10/15/
20/30/40/50 (min) 1/2/3/
4/6/12/24 (hour)
Pre-Lighting Off/2sec/5sec/10sec
<0> See page 148.
<1>
<2>
<3>
<4>
<5>
RET
C. Temp
Zoom Speed 0 to 20 to 99
Description
When "Interval Rec" or "Frame
Rec" is set to "On," specifies the
number of frames to shoot in one
Interval Rec or Frame Rec take.
When "HD System Line" is set to
"720," and "System Frequency" is
set to "59.94P" or "50P."
When "HD System Line" is set to
other than "720", or "System
Frequency" is set to other than
"59.94P" or "50P."
Set the interval for Interval Rec
shooting, when "Interval Rec" is set
to "On."
If you want the video light to be
turned on before Interval Rec
shooting, select a number of seconds
before the start of shooting. If you
do not want it to be turned on, select
Off.
Assigns function to ASSIGN. 0
switch.
Assigns function to ASSIGN. 1
switch.
Assigns function to ASSIGN. 2
switch.
Assigns function to ASSIGN. 3
switch.
Assigns function to ASSIGNABLE
4 switch.
Assigns function to ASSIGNABLE
5 switch.
Assigns function to RET button on
the lens.
Assigns function to COLOR TEMP.
button.
When Zoom has been assigned to
the ASSIGNABLE 4 or 5 switch,
specifies the zoom speed.
Note
When the lens supplied with the PMW-
400 is used, zooming may not operate
smoothly if the zoom speed is low.