Sony PMW-400K Operating Instructions Manual page 136

MAINTENANCE
Menu items
Camera Config
Makes settings related
to various camcorder
operations.
136 Menu List
Sub-item Settings
Rec Tally Blink On/Off
Rec Review 3sec/10sec/Clip
HD SDI Remote I/F Off/Chara/G-Tally/
R-Tally
Color Bars Select ARIB/100%/75%/
SMPTE
RM Common On/Off
Memory
RM Rec Start RM/CAM/PARA
Image Invert On/Off
Rec Start/Stop Beep On/Off
Description
Turns warning flashes by the
TALLY indicator on or off. The
warnings alert you an almost
exhausted battery pack or low
remaining media capacity.
Selects the recording review time.
Clip: Review all of the most
recently recorded clip.
Selects whether to use the function
that enables recording control from
this camcorder of an external device
connected to the HD/SD SDI OUT
connector (HDSDI output). When
the function is used, also selects the
indication that shows whether the
external device is recording.
Off: Do not use the remote
recording control function.
Chara: Indicate by the external
device control indication on the
viewfinder screen.
G-Tally: Indicate by the green tally
indicator on the viewfinder
screen.
R-Tally: Indicates by the recording
mode/operation status
indication on the viewfinder
screen.
Selects the color bar type.
Selects whether to share ("On") or
not share ("Off") settings between
times when a remote control unit is
connected and times when the
camcorder is used locally.
For times when a remote control
unit is connected, selects whether
recording start/stop buttons are
enabled on the camcorder or the
remote control unit.
RM: Remote control unit
CAM: Camcorder
PARA: Both
Turns the function that inverts
images vertically on or off.
Specifies whether to generate
("On") or not generate ("Off") a
beep alarm when recording starts/
stops.
With this item set to "On," a single
beep sounds when recording starts
and a double beep sounds when
recording stops.