Sony PMW-400K Operating Instructions Manual page 134

MAINTENANCE
Menu items
WRR Setting
Makes settings related
to the wireless tuner.
134 Menu List
Sub-item Settings
WRR Valid CH Sel All/CH1
WRR CH Select TX1/TX2
WRR Delay Comp On/Off
TX ---
TX Audio Peak ---/Peak
TX Input Level ---/Mic/Line
TX ATT Level ---
TX LCF Freq ---
TX System Delay Auto/0.0ms to 8.0ms
Description
Selects whether to enable channels 1
and 2 of the wireless receiver ("All")
or channel 1 only ("CH1").
Specifies the target channel for other
sub-items.
TX1: Channel 1
TX2: Channel 2
Enables ("On") or disables ("Off")
delay compensation for wireless
audio input. (When "On" is
selected, the audio in all E-E output
is delayed by about 8 ms.)
Displays the name of the transmitter
whose signals are being received on
the channel selected by "WRR CH
Select."
Displays whether the AF level of the
transmitter whose signals are being
received on the channel selected by
"WRR CH Select" are over peak.
Displays whether the input level of
the transmitter whose signals are
being received on the channel
selected by "WRR CH Select" is set
to microphone ("Mic") or line
("Line").
Sets the ATT level of the transmitter
whose signals are being received on
the channel selected by "WRR CH
Select." (The setting range varies
depending on the transmitter.)
Sets the low cut filter frequency of
the transmitter whose signals are
being received on the channel
selected by "WRR CH Select." (The
setting range varies depending on
the transmitter.)
Specifies the amount of audio delay.
Auto: Automatically adjusts the
amount of delay so that the
delay in the audio received
from the wireless transmitter is
zero.
0.0ms to 8.0ms: Sets the amount of
anticipated wireless system
delay, for cases in which
several wireless systems are
being used over a devices such
as an audio mixer.