Sony PMW-400K Operating Instructions Manual page 106

To enter text
Some items, such as time data or file names, must
be set by entering text. When you select one of
these items, the text entry area is highlighted, with
"SET" displayed to the right.
1
Turn the MENU knob, or press the J or
j button, to select a character, and then
confirm by pressing the MENU knob or
the SET button.
The cursor moves to the next position.
To return to the previous position, push the
MENU CANCEL/PRST/ESCAPE switch
down to the ESCAPE side.
2
Select characters for all positions up to
the last.
The cursor moves to "SET."
3
Press the MENU knob or the SET
button.
This confirms the setting.
To cancel the setting change
Push the MENU CANCEL/PRST/ESCAPE
switch down to the ESCAPE side.
To reset a setting to the initial value
1
Before a setting is changed or after a
setting change is cancelled, push the
MENU CANCEL/PRST/ESCAPE
switch up to the CANCEL/PRST side.
2
When the message to confirm whether
the current setting is reset to the initial
value, push the MENU CANCEL/
PRST/ESCAPE switch up to the
CANCEL/PRST side again.
The current setting is reset to the initial value.
To exit the menu
Set the MENU ON/OFF switch to OFF or press
the MENU button.
The normal camera picture reappears.
106 Basic Setup Menu Operations