Setting The Date/Time Of The Internal Clock - Sony PDW-F800 Operation Manual

3
Turn the MENU knob to display the
desired area of use.
Setting
NTSC(J)AREA
NTSC AREA
PAL AREA
a) The composite signal output from this unit is an
NTSC signal with no black setup. The system
frequency is 59.94i.
b) The composite signal output from this unit is an
NTSC signal with a black setup (7.5 IRE). The
system frequency is 59.94i.
c) The composite signal output from this unit is a
PAL signal. The system frequency is 50i.
4
Change the SYSTEM LINE (video
resolution) setting as required.
Setting Resolution (horizontal × vertical)
1080 1080 lines (1920 × 1080)
720 720 lines (1280 × 720)
5
Set the POWER switch to OFF, then
once again to ON.
The unit is now ready for use.
44

Setting the Date/Time of the Internal Clock

Area of use
a)
NTSC area (Japan)
NTSC area (for areas other
b)
than Japan)
c)
PAL area
Setting the Date/Time of
the Internal Clock
You can set or change the date and time of the
internal clock. The date and time set are reflected
in the timecode.
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1
Display the TIME/DATE page of the
DIAGNOSIS menu, and press the
MENU knob.
For details on menu operations, see "Basic
menu operations" on page 205.
D02 TIME/DATE
ADJUST
HOUR
MIN
SEC
YEAR
MONTH
DAY
2
Press the MENU knob.
The TIME ADJUST setting window appears.
TIME ADJUST
HOUR
MIN
SEC
YEAR
MONTH
DAY
OK
• HOUR: Sets the hour value.
• MIN: Sets the minutes value.
• SEC: Sets the seconds value.
• YEAR: Sets the year.
• MONTH: Sets the month.
• DAY: Sets the day.
3
Turn the MENU knob to move b to the
item you want to set, and press the
MENU knob.
b
on the left of the selected item changes to
z and z on the left of the setting changes to
?.
TOP
: EXEC
: 12
: 55
: 58
: 08
: 03
: 31
ESC
: 12
: 55
: 58
: 08
: 03
: 31