Chapter 5 : Operations In Gui Screens; Overview; Switching Between Gui Screens - Sony PDW-F800 Operation Manual

5 Operations in GUI Screens
Chapter

Overview

You can perform scene searches, play the
searched scenes, and select scenes (edit clip list)
in Graphical User Interface (GUI) screens. The
GUI screens are your gateways to discs and the
data saved on discs.

Switching between GUI screens

The most important GUI screens are:
Clip thumbnail screen: Displays thumbnails of
clips on the disc. "Clip" is displayed as the
title at the upper left of the screen (see
page 112).
Clip list thumbnail screen: Displays thumbnails
of sub clips in a clip list. "Clip List" is
displayed as the title at the upper left of the
screen (see page 112).
There are also two playback screens:
Clip playback screen: Playback screen for
normal video
Clip list playback screen: Playback screen for
clip list video
You will use the THUMBNAIL/ESSENCE
MARK button 1 and the SUB CLIP/DISC
MENU button 2 to switch between these four
screens. Each press of these buttons switches
between the screens as shown in the following
figure. The THUMBNAIL and SUB CLIP
indicators light as follows, according to the type
of screen that is currently displayed.
Note
To switch between these four screens, a disc with
recorded clips must be loaded in the unit.
(The GUI screens can display European
languages, Japanese, Korean, Simplified
Chinese, and Traditional Chinese for clip names
and titles.)
Overview 111