Sony PDW-F800 Operation Manual page 125

Item name Filtering condition
Clip Flag: OK Clip flag set in the clip
(OK/NG/KP(KEEP)/
Clip Flag: NG
none)
Clip Flag:
KP(KEEP)
Clip Flag: none
Current Planning Clips that have been
Metadata recorded according to the
instructions in the
currently loaded planning
metadata
AV Format of Video format of the
Selected Clip selected clips
6
Press the SET/S.SEL button or the
MENU knob.
A filter thumbnail screen appears, showing
only clips that meet the specified condition.
The filtering condition appears at the lower
left of the screen.
7
If you want to filter the clips again with
a different filtering condition (to
narrow down the filtering results),
repeat steps 2 to 6. (The command name
selected in step 4 changes to Filter
Clips(Narrowing).)
To play selected clips continuously
Register all of the filtered clips in an
automatically generated clip list, and play the clip
list.
1
Display the Thumbnail Menu in the
filter thumbnail screen.
2
Select "Copy to Clip List", and then
press the SET/S.SEL button or the
MENU knob.
A clip list thumbnail screen appears, showing
filtered clips that have been registered in the
clip list.
3
Press the PLAY/PAUSE button.
The screen changes to the clip playback
screen, and playback starts.
Operations on filtering results
You can use the Thumbnail Menu in the filter
thumbnail screen to perform the following
operations.
Item name Function
Clip Information Select the information to
be displayed at the bottom
of the thumbnails.
Lock or Delete All Lock all of the filtered
Filtered Clips >Lock clips.
All Filtered Clips
Lock or Delete All Unlock all of the filtered
Filtered Clips clips.
>Unlock All Filtered
Clips
Lock or Delete All Delete all of the filtered
Filtered Clips >Delete clips.
All Filtered Clips
Filter Narrow down the filtering
Clips(Narrowing) results.
Copy to Clip List Copy all of the filtered
clips to a new clip list.
Upload Clips via Transfer all of the filtered
Direct FTP clips to an external device
via a network.
To display clip filtering conditions as Title2 titles
For clip lists created with the Copy to Clip List
command, you can display the clip filtering
conditions as Title2 titles.
When Settings >Display Title in the Disc Menu is
set to "On: Title2 {title2}", the clip filtering
conditions are displayed automatically in screens
such as the Load Clip List screen.
Thumbnail Operations 125