Sony PDW-F800 Operation Manual page 193

No. Page Item
17/18 AUTO IRIS 2 IRIS WINDOW
IRIS WINDOW
IND
IRIS LEVEL
IRIS APL RATIO
IRIS VAR WIDTH
IRIS VAR HEIGHT 20 to 135 to 269 Adjusts the height of detection frame when
IRIS VAR H POS
IRIS VAR V POS
IRIS SPEED
CLIP HIGH LIGHT OFF/ON
18/19 GENLOCK GENLOCK
GL HD H PHASE
GL SD H PHASE
(Does not appear
when the FORMAT
page item SYSTEM
LINE is set to 1080
and the SYSTEM
FREQUENCY item
is set to 23.9P)
REFERENCE
19/20 ND COMP ND OFFSET
ADJUST
CLEAR ND
OFFSET
Settings Description
1/2/3/4/5/6/VAR Selects the auto iris detection window.
VAR: variable
OFF/ON Turns on and off the function which displays a
frame marker for the auto iris detection
window.
(–99 to 99) Adjusts the level of the auto iris target value.
(–99 to 99) Adjusts the mix ratio of auto iris detection
peak value and average value.
20 to 240 to 479 Adjusts the width of detection frame when the
auto iris detection window is set to VAR.
the auto iris detection window is set to VAR.
–460 to 0 to 459 Adjusts the horizontal position of detection
frame when the auto iris detection window is
set to VAR.
–250 to 0 to 249 Adjusts the vertical position of detection
frame when the auto iris detection window is
set to VAR.
(–99 to 99) Adjusts the auto iris speed.
Turns on and off the function which, during
auto iris adjustment, ignores very bright areas
by dulling the reaction to high luminescence.
OFF/ON Turns genlock on and off.
(–99 to 99) Sets the HD output H phase for genlock
operation.
(–99 to 99) Sets the SD output H phase for genlock
operation.
INTERNAL/ Displays the type of reference signal used by
GENLOCK/ this unit.
SDI IN
OFF/ON Turns on and off the mode which sets ND
(neutral density) filter color compensation
values.
EXEC Clear ND filter color compensation values.
Menu List 193