Loading Scene Files - Sony PDW-F800 Operation Manual

To select the file information items to be
displayed
You can select the items of file information to be
displayed on the SCENE STORE pages (P01 to
P20) or the SCENE RECALL pages (P01 to P20)
used for saving data to or loading data from a
"Memory Stick".
You can select the scene file information items to
be displayed on the SCENE STORE page and
SCENE RECALL page of the SCENE FILE
menu.
For details about item selection, see the description
of step 2 and following of "To select the file
information items to be displayed" on page 233.

Loading scene files

(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1
Display the SCENE FILE page of the
FILE menu, and press the MENU knob.
For details on menu operations, see "Basic
menu operations" on page 205.
2
To load the scene file stored in the
camcorder, select the desired file
number, and press the MENU knob.
s on the left of the file number changes to
x. The camcorder is set up according to the
loaded scene file.
F04 SCENE FILE
s 1
:SCENE 25
x 2
:SCENE 26
s 3
:SCENE 27
s 4
:SCENE 28
s 5
:NO FILE
s STANDARD
SCENE RECALL
SCENE STORE
F.ID :SCENE21
When DISP SCENE FILE on the VF DISP 3
page of the OPERATION menu is set to
"ON", the number of the currently loaded
scene file is displayed on the viewfinder
screen (see page 36).
To cancel the selected scene file
Turn the MENU knob to move b to x, and
press the MENU knob again. x changes to
s. The camcorder returns to the settings
before selecting this scene file.
236 Saving and Loading Scene Files
3
To load scene files from the "Memory
Stick" into the camcorder memory
You can load up to five scene files stored in the
"Memory Stick" into the camcorder memory all
in a single operation.
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1
TOP
2
: EXEC
: EXEC
3
4
To load a scene file saved in the "Memory
Stick"
1 Select SCENE RECALL, and press the
MENU knob.
The SCENE RECALL page appears.
2 Turn the MENU knob until the page
which contains the desired file number
appears, then press the MENU knob.
3 Select the desired file number, and
press the MENU knob.
The message "RECALL OK? YES b
NO" appears.
To carry out the recall, select YES and
press the MENU knob.
To cancel, press the MENU knob leaving b
pointing to NO.
When the loading is completed, the message
"COMPLETE" appears. The camcorder is
set up according to the loaded scene file. If no
file is present with a particular file number,
this is shown as "NO FILE".
Display the SCENE FILE page of the
FILE menu, and press the MENU knob.
For details on menu operations, see "Basic
menu operations" on page 205.
Select SCENE RECALL, and press the
MENU knob.
The SCENE RECALL page appears.
Turn the MENU knob until the SCENE
RECALL page which contains the
desired scene files appears, and press
the MENU knob.
Select 5FILE LOAD b MEM1-5, and
press the MENU knob.
The message "RECALL OK? YES b NO"
appears.