Setting The Ptz Control - Ptz Control Menu; Solid Ptz Tab; Setting The Camera Tampering Detection/Motion; Detection - Action Input Menu - Sony Ipela SNC-CX600W User Manual

Setting the PTZ control
— PTZ control Menu
When you click PTZ control
the PTZ control menu appears.
The PTZ control menu consists of the Solid PTZ tab.

Solid PTZ Tab

Solid PTZ
Select the checkbox to enable the Solid PTZ function.
You can set Image 1, Image 2 and Image 3 separately.
Note
The Solid PTZ function is not available with Plug-in free
viewer.
OK/Cancel
See "Buttons common to every menu" on page 19.
Setting the PTZ control — PTZ control Menu / Setting the Camera tampering detection/Motion detection — Action input Menu
in the Administrator menu,
Setting the Camera
tampering detection/
Motion detection
— Action input Menu
When you click Action input
the Action input Menu appears.
The Action input Menu consists of the Event condition,
Camera tampering detection, Motion detection, Face
detection and Network disconnection tabs.
When the Motion detection or Face
detection tab is displayed for the first
time
When you click Motion detection or Face detection,
"Security Warning" is displayed. When you click Yes,
ActiveX control is installed and the Motion detection or
Face detection tab is displayed.
Notes
• If Automatic configuration is enabled in the Local
Area Network (LAN) settings of Internet Explorer, the
image may not be displayed. In that case, disable
Automatic configuration and set the proxy server
manually. For the setting of the proxy server, consult
your network administrator.
• When you install ActiveX control, you should be
logged in to the computer as Administrator.

Event condition Tab

Create event execute conditions for each action.
Event condition 1, 2, 3, 4, 5
Select the event condition.
You can combine the alarm using the following event
execute conditions.
and: detect when both conditions happen within a
specified interval regardless of the sequence.
or: detect when either condition happens.
then: detect when each of the conditions happen within
a specified interval in sequence.
If you set the event condition to None, the following
alarm 1, 2, 3 menus appear.
1, 2, 3
Select the alarm.
Selectable alarms are as follows;
Camera tampering detection: The alarm is triggered if
the camera detects tampering, such as direction
shifting or spray.
in the Administrator menu,
41