White Balance; Video Codec Tab - Sony SNC-WR630 User Manual

Visibility Enhancer
Using the Visibility Enhancer function will make the
darker part of a camera image brighter as well as
automatically correct brightness and contrast to show
bright parts clearly without overexposure.
Backlight compensation
Select the checkbox to enable the backlight
compensation function.
Exposure compensation
Select the exposure correction value from the list box to
adjust the target brightness for the automatic exposure
setting. A larger value brightens the image, and a smaller
value darkens the image.
Auto gain Max. value
Limit the maximum value of gain-controlled automatic
exposure control.
Note
The value shown in the auto gain maximum rate is a
standard value, and may differ from the actual one.
Shutter speed
• Auto-controlled shutter speed automatically sets the
exposure.
• Select the minimum and maximum shutter speeds
from the list box.

White balance

Mode
Select the White balance mode.
ATW: Eliminating the influences caused by
environmental illumination or lights, adjust the white
balance automatically to reproduce original colors of
the objects (approximately 2000 K to
10000 K).
ATW-PRO: Automatically adjusts the color to be
closest to the image you are viewing (approximately
2500 K to 6000 K).
Indoor: Sets a white balance suitable for indoor
photography.
Outdoor: Sets a white balance suitable for outdoor
photography.
Fluorescent lamp: Sets a white balance suitable for
photography under three-band fluorescent lighting
with a neutral white color.
Mercury lamp: Sets a white balance suitable for
photography under a mercury lamp.
Sodium vapour lamp: Sets a white balance suitable for
photography under a high-pressure sodium vapor
lamp.
Metal halide lamp: Sets a white balance suitable for
photography under a metal halide lamp.
White LED: Sets a white balance suitable for
photography under the light of white LEDs.
One push WB: The One push trigger button becomes
active. Click On to adjust the white balance instantly.
Manual: When this option is selected, R gain and B
gain become active. Selectable gain values are from
0 to 4095.
Picture
NR (XDNR)
Select the level to reduce image noise. When you select
Off, the NR function is not available.
Brightness
Set the brightness. Select high values to make the image
brighter, lower values to make the image darker.
Saturation
Set the saturation. Select high values to make the image
color stronger, lower values to make the image color
weaker.
Sharpness
Set the sharpness. Select high values to make the image
edges sharper, lower values to make the image edges
smoother.
Video output mode
Set a signal to output the analog video from the video
output terminal of the camera.
You can select NTSC or PAL.
OK/Cancel
See "Buttons common to every menu" on page 20.

Video codec Tab

Use this tab to set the items for the video codec.
High framerate mode
When the setting is set to On, set the maximum frame
rate to 60 fps (NTSC) or 50 fps (PAL).
When the setting is set to Off, the maximum frame rate
is 30 fps (NTSC) or 25 fps (PAL).
Note
When the setting is set to On, Image 2 may not be
available, and Image 3 is not available.
Setting the Camera Image and Audio — Video / Audio Menu
25