Table of Contents
Advertisement
Message number Error message
WARN_28
BALLAST ERROR
WARN_30
COVER DETACHED
WARN_31
FAN ERROR
WARN_32
FAN ERROR
WARN_33
FAN ERROR
FAILURE: Danger level – Low
Message number
Error message
FAIL_02
TEMPERATURE ERROR
FAIL_04
TEMPERATURE ERROR
FAIL_06
TEMPERATURE ERROR
FAIL_10
TEMPERATURE ERROR
FAIL_11
TEMPERATURE ERROR
FAIL_12
TEMPERATURE ERROR
FAIL_15
TEMPERATURE ERROR
FAIL_16
LENS ERROR
FAIL_17
LENS ERROR
FAIL_18
LENS ERROR
FAIL_19
LENS ERROR
FAIL_21
ADJUSTMENT ERROR
FAIL_25
DEVICE ERROR
FAIL_26
DEVICE ERROR
FAIL_27
DEVICE ERROR
FAIL_28
DEVICE ERROR
FAIL_29
DEVICE ERROR
FAIL_30
BALLAST ERROR
FAIL_36
DEVICE ERROR
Information Messages
The message number is not displayed for information messages. Check the following if a message appears in the STATUS
MESSAGE window.
Message
LOW REAL TIME CLOCK BATTERY
LAMP ALERT
AIR FILTER WARNING OPTICAL
Meaning
Incorrect settings of the lamp S/N
Filter duct is detached
Abnormal in fan for PS2
Abnormal in fan for PS1
Abnormal in fan for PBS
Meaning
Warning for abnormal temperature of 8-inch duct
Temperature of the intakes is too high.
Temperature of the optical unit area is too high.
Warning for abnormal temperature of Panel R
Warning for abnormal temperature of Panel G
Warning for abnormal temperature of Panel B
Warning for abnormal temperature of the lamp power
Failure of the zoom position adjustment to the registered setting
Failure of the lens focus adjustment to the registered setting
Trouble with the zoom position adjustment
Trouble with the lens focus adjustment
Abnormal in the Z-axis adjustment
Failure of FPGA configuration
Trouble with the IIC circuit
Trouble with the LVDS circuit
Trouble with the PLL circuit
Trouble with the PARITY circuit
Lamp power interlocked
Error of the DVI setting
Meaning
The RTC battery (BT200) for the SY board should be replaced.
The recommended usage time of the projection lamp has passed.
The recommended usage time of the optical air filter has passed.
71
Messages
Advertisement
Table of Contents
