Connecting The Computer Via The Rs-232C; Starting The Srx Controller - Sony SRX-T420 Operating Instructions Manual

User manual (srx-t420 user manual)

Hide thumbs Also See for SRX-T420:

Table of Contents

Enlarged version

Connecting the Computer via the

RS-232C

RS-232C connector

Connecting cable (not supplied)

RS-232C connector

Computer for controlling

the projector

Starting the SRX

Controller

Starting the SRX Controller

Double-click the

icon for the SRX Controller in the

desktop window of the computer.

The SRX Controller starts and the Program Launcher

screen is displayed.

Note when starting the SRX Controller

When the Operating System of the computer is Windows

XP SP2 or later, or any commercially available firewall

software is installed in your computer, the following may

occur. In these cases, unblock the Windows firewall

following the procedures below.

For Windows XP SP2 or later

If the dialog shown below appears when the SRX

Controller is started, select "Unblock." When the dialog

does not appear but the computer does not access the

projector, start "Windows Firewall" from "Control Panel,"

and then add "SRX Controller" to the list in the

"Exceptions" tab.

For commercially available firewall software

Add "SRX Controller" to the Exceptions list, referring to

the operating instructions supplied with the software.

Table of Contents