Table of Contents
Advertisement
Preparations
Precautions on
Installation
Unsuitable Installation
Do not install the projector in the following situations.
Such installations may cause a malfunction or damage to
the projector.
Poorly ventilated
The projector is equipped with ventilation holes for intake
and exhaust to prevent internal heat build-up. Do not place
the projector in a place where the ventilation holes may be
blocked.
Situation that may block the ventilation
holes for exhaust
If you put something beside the ventilation holes for
exhaust on the side or rear of the projector, the exhaust
may be inhaled into the projector through the ventilation
holes for intake, causing internal heat build-up and thereby
Chapter
activating the protection circuit. Be sure not to block the
ventilation holes for exhaust. Leave a space of more than
3
1 m (39
/
inches) around the unit.
8
Extremely hot and humid
Location subject to sudden change of
temperature
A sudden change of temperature may produce moisture
condensation, causing damage to the projector. Take care
with heaters or air-conditioners.
Very dusty
2
49
Precautions on Installation
Advertisement
Table of Contents
