Test Pattern; Single 3D Adjust; Input Signals And Adjustable/Setting Items - Sony SRX-T420 Operating Instructions Manual

Luminance Value: The value is referred to when your
Sony service representative performs axis
adjustments after replacing the lamp.
Note
Switching the lamp output frequently may reduce the lamp
life. Use of the defined lamp output is recommended.

TEST PATTERN

Displays a built-in test pattern on the screen for adjusting
the picture with no signal input from external equipment.
Click the radio button of the desired test pattern from
among "Cross Hatch," "Cross Hatch (Invert)," "Checker
Flag" and "Test mode 1 (all white)." When you do not
display a built-in test pattern, click the "Off" radio button.
Notes
• While a built-in test pattern is displayed on the screen,
you cannot switch the INPUT SELECT radio button,
and cannot adjust the PICTURE CONTROL and
COLOR/FRAME settings.
• "Single 3D" is used for projecting a 3D image. For
details, contact your Sony Dealer.

SINGLE 3D ADJUST

Used to project a 3D image.
For details, contact your Sony Dealer.
66

Input Signals And Adjustable/Setting Items

Input Signals And
Adjustable/Setting Items
Some items of "Signal Adjust" in the PICTURE
CONTROL window and "Frame Adjust" in the COLOR/
FRAME window are not adjusted or set depending on the
input signals. Items that cannot be adjusted depending on
the input signal are not displayed in the window.
Signal Adjust
Item
HD-SDI
Contrast z
Brightness z
Color z
Sharpness z
z: Adjustable/can be set
–: Not adjustable/cannot be set
Frame Adjust
Item
HD-SDI
Dot Phase –
H Size –
H Shift z
z
V Shift
z: Adjustable/can be set
–: Not adjustable/cannot be set
Input signal
DVI-D 4K
z z
z z
– –
– –
Input signal
DVI-D 4K
– –
– –
z –
z
–