Adjusting The Sensitivity Of The Expression Pedal - Vox Tonelab EX Owner's Manual

Adjusting the sensitivity of the
expression pedal
If the minimum and maximum values of the parameter are
assigned as the minimum and maximum values of the expres‐
sion pedal, but the effect or volume fails to reach the maxi‐
mum (or minimum) setting when the expression pedal is fully
advanced (or returned), you can adjust the sensitivity of the
expression pedal as follows so that it will function optimally.
NOTE: When adjusting the sensitivity, you must operate the
expression pedal with your foot; in some cases, it may
not be possible to adjust the pedal sensitivity if you
operate it with your hand.
1. Turn the power off (STANDBY).
2. While holding down the EXPRESSION switch and
WRITE switch, turn the power on.
3. When the program display indicates "
switches.
4. Advance the expression pedal so that
the effect switches on/off.
This will be assigned as the weight that
will switch on/off the effect assigned to
the expression pedal.
5. Use your foot to slowly return the
expression pedal toward yourself, and
take your foot off when the pedal
stops.
34
6. Softly advance the expression pedal, and take your foot
7. Press the WRITE switch.
," release the
off when the pedal stops.
NOTE: If you decide to cancel this sensitivity adjustment,
press the EXIT/TUNE switch.
The program display will indicate "
second, and then the program number will appear.
If the sensitivity adjustment could not be performed cor‐
rectly, the program display will blink "
indicate " ". In this case, perform the procedure from
step 4.
NOTE: If you are repeatedly unsuccessful in adjusting the
sensitivity, it is possible that the ToneLab EX has
malfunctioned. Please contact your nearby VOX
dealer.
" for about one
", and will then