Vox Tonelab EX Owner's Manual page 15

Program Select Mode
This mode enables you to select and play programs.
When you power the ToneLab EX on, it automatically
engages this mode, and the Bank/Value display indicates a
bank number.
Use the BANK UP, BANK DOWN, and Program 1–4 pedals
to select a program.
For example, to select program 3‐1 (Bank 3, Program 1), press
the BANK UP/DOWN pedals to select "3" on the Bank dis‐
play, then press the Program 1 pedal to light the LED.
You can press the Program 1–4 pedals to select programs in
the same bank. If you want to select a program in other
banks, press the BANK UP/DOWN pedals to select a bank,
then press the Program 1–4 pedals to select a program.
Each program contains settings that assign the expression
pedal to control wah, volume, delay feedback, reverb input
level, or some other effect parameter. Use the expression
pedal to try out the assigned parameter for each program.
Stomp Box Mode
This mode enables you to turn the effects that are assigned to
the currently selected program on or off.
In Program Select Mode, press both the BANK UP and BANK
DOWN pedals simultaneously for one second, The Bank/Value
display indicates " " and Stomp Box Mode is engaged.
Each effect on/off is assigned to the following pedals:
Effect
STAND ALONE PEDALS/AMPS
PEDAL 1
PEDAL 2
MODULATION
DELAY
REVERB
For example, if the Program 1 LED is lit, the Pedal 2 effect is
on. Pressing the Program 1 pedal will turn the Pedal 2 effect
off, and the Program 1 LED will become dark.
In the same way, if the AMPS bank select LED is lit, the amp
model is on. Pressing the BANK UP pedal will turn the amp
model off, and the AMPS bank select LED will become dark.
Saving the effect on/off status as a program
The effect on/off status in Stomp Box Mode will remain
unchanged when you switch to Program Select Mode. How‐
ever, if you select other programs, or power the ToneLab EX
off after you switch to Program Select Mode, the edited effect
on/off status will be cancelled and will revert to its initial set‐
ting for the program.
If you want to save the effect on/off status in Stomp Box
Mode to a program, you must save the setting by pressing the
WRITE switch.
For details, refer to "Saving a program" (p. 15).
Pedal and LED
BANK UP
BANK DOWN
Program 1
Program 2
Program 3
Program 4
11