Using The Pedal; Battery Operation; Specifications; Battery Installation - Vox Cooltron Owner's Manual

Using the Pedal?

1. Turn on the power.
If you are using batteries
Connecting a guitar cable to the INPUT jack will turn on the power automati-
cally. When you're finished playing, make sure you disconnect the cable from
the INPUT jack so that the batteries will last longer.
If you are using an optional AC adapter
The power will be on regardless of whether a cable is connected to the INPUT
jack, so unplug it when you're finished!
2. Connect the OUTPUT jack to your guitar amp.
Before doing so, turn the volume on your amp down. Your speakers and ears will
thank you.
3. Pressing the effect switch alternates between effect on and bypass.
COOLTRON pedals are True Bypass so when the effect is not on, your signal
remains unchanged.
4. Volume knob controls the overall volume (output) of the pedal.
5. Tweak your sound with the control knobs.
As with any piece of high-end gear, use your ears to decide what works best for
you. Don't have ears? Find someone who does and let them twiddle away.
You won't hear sound for several tens of seconds while the valve warms up.

Battery Operation

When the batteries begin to run down, the Effect LED will become dimmer. Re-
place the batteries in the compartment located on the bottom of the pedal. If the
batteries run down completely, the effect will not operate. Replace immediately,
you can't let your fans down.
B
A

Battery Installation

If you plan on not using the pedal for an extended period of time, (we'll assume
you are on a holiday, otherwise why wouldn't you be using it?) remove the bat-
teries to avoid damage caused by leakage.
1. Loosen the screw (A) with a coin or screwdriver.
2. Slide the battery cover (B) to remove .
3. Pull out the battery holder and insert new batteries.
Observe the correct polarity and use AA size alkaline batteries only.
4. Insert the battery holder and put the battery cover back on (B).
5. Fasten the screw (A).
6. Get back to writing great songs.

Specifications

Connections Input : x1 (guitar input), Output : x1 (line output)
Input /Output impedance (Bulldog Distortion, Big Ben Overdrive, Brit Booster) :
830k-ohms /4k-ohms, 830k-ohms /4k-ohms, 1k-ohms /4k-ohms
Tube : 12AU7 (ECC82)
Power supply : Four LR6(AA size) alkaline batteries or DC9V
Battery life : 16 hours of continuous use
Dimensions : 168.5 x 155.5 x 64 mm (WxDxH) /6.63 x 6.12 x 2.52 inches
Weight (Bulldog Distortion, Big Ben Overdrive, Brit Booster) :
1.07, 1.02, 1.05 kg (not including batteries)/2.36, 2.25, 2.31 lbs
Included items : Owners manual, Four LR6(AA size) alkaline batterie