Panel Tour
(Top and rear panels)
Here we'll introduce you to the switches, controls, and con‐
nections on the ToneLab EX's top panel.
Top panel
1
2
3
4
5
2
6
7
8
9
1. Amp section
Here youʹll create settings for the amp model and stand alone
pedal.
For details on each effect, refer to "Amp models" (p. 15) and
"stand alone pedals" (p. 22).
NOTE: You cannot use the amp model and stand alone pedal
simultaneously. If you turn one of them on, the other
will turn off.
a
b
c
d
e
a. AMPS bank select switch and LED
Use this to switch the bank, or to turn the amp model on/off.
Each time you press the switch, the bank will cycle between
STANDARD, SPECIAL, CUSTOM, STANDARD...
The color of the LED will indicate the bank that's selected.
• STANDARD: green
• SPECIAL: orange
• CUSTOM: red
The LED will be lit‐up if the amp model is on. By holding
down this switch for about one second you can switch the
amp model on/off.
g
h
f