Adjusting The Sensitivity Of The Expression Pedal; 调节表情踏板的灵敏度 - Vox ToneLab ST Owner's Manual

3. Use the VOLUME control to specify the maximum value,
and then press the EXP PARAM switch.
The maximum value will be specified; the program display
will indicate " " for about one second, and will
then indicate the program number.
3、使用 VOLUME 控制器指定最大值，然后点击 EXP PARAM 开关。
最大值将被指定；编程音色的显示屏会提示" "大约一秒钟，然后显示音色
的序号。

Adjusting the sensitivity of the expression pedal

调节表情踏板的灵敏度
If the minimum and maximum values of the parameter are
assigned as the minimum and maximum values of the expression
pedal, but the effect or volume fails to reach the maximum
(or minimum) setting when the expression pedal is fully
advanced (or returned), you can adjust the sensitivity of the
expression pedal as follows so that it will operate optimally.
如果参数的最大值和最小值被分配给表情踏板的最大值和最小值， 而效果器或者
音量并没有在表情踏板完全向前（或者返回）时达到最大值（或最小值） ，你可
以按照如下方式调节表情踏板的灵敏度，从而使其操作更为优化。
NOTE: When adjusting the sensitivity, you must operate the
expression pedal with your foot; in some cases, it may not be
possible to adjust the pedal sensitivity if you operate it with
your hand.
注意：如果要调节灵敏度，你必须用脚来控制表情踏板；在某些情况下，如果你
用手操作的话将无法调节其灵敏度。
1. Turn the power off.
1、关闭电源。
2. While holding down the EXP PARAM switch and WRITE
switch, turn the power on.
2、按住 EXP PARAM 开关和 WRITE 开关，打开电源。