M3097E Operator Panel; Button Names And Functions - Fujitsu 50FH5037E-02 Oem Manual

3.5 Operator Panel
Figure 3.4 shows the operator panel and Tables 3.1 and 3.2 list the button and lamp
names and functions.
Mode 1
Liquid crystal display
24 columns ¥ 2 rows
Mode 1
Switch name
Start Press this button to start the read operation. In manual mode,
when the ready lamp is lit.
Stop If this button is pressed during a read operation, the following
results occur:
For a flatbed: Interrupts the read operation immediately, and
For an automatic feeder: Interrupts a read operation immediately,
Press this button after removing jammed paper to release the jam
state and enables read operation.
Resolution Specifies the read resolution. The read resolution is displayed on
the LCD.
Document Specifies the documents from which data is read.
Halftone Specifies whether to perform halftone processing (dithering or error
diffusion). Also, specifies the automatic separation (dithering or
error diffusion) if an image processing ¬ option is present.
Density Specifies the read density.
Size Specifies the paper size.
ADF Specifies whether to read data from documents by using the
automatic document feeder or the flatbed.
Landscape Specifies whether to read data from documents in portrait or
landscape mode (read direction).
Mode 1 Will be described later.
Mode 2 Will be described later.
ADF Size
Landscape
Figure 3.4 M3097E operator panel
Table 3.1 Button names and functions
returns the carrier to the home position.
50FH5037E>02
Density Resolution
Halftone Document
Function
and ejects the paper being fed. Paper
that has already been picked, but from
which data has not been read yet, is
ejected without being read.
Power
Stop
Ready
Start
Check
3 $ 7