Table of Contents
Advertisement
Image control register
When the image processing option (IPC ¬) is connected, the following image
processing can be executed. This register sets the image processing mode.
$
Image area automatic separation function (simultaneous reading of characters
and photographs)
$
Inversion function (black/white conversion)
$
Mirror image output function (right/left conversion)
$
Image emphasis, outline extraction function
$
Overlay function
$
Symplified dynamic threshold
$
Zooming function ranging from 25% to 400% in 1% increments.
$
Function to change the reading mode of a section in the main window
(subwindow function) (*3)
The method of image processing can be separately specified for the main window
and subwindow.
*3: This function is executed by the subwindow control command described later.
(a)
Image control register #0
7
6
5
4
#0
0
0
0
0
X©00π is set when the power is turned on or the initial state is specified by the
CLEAR command.
This register must be sent before setting the image control registers #1 to #8.
LSB
3
2
1
0
0
0
0
0
50FH5037E>02
6 $ 21
Advertisement
Table of Contents
